Frequently Asked Question

Detecting presense and loss of video:

The DXW-2 (as of FW 1.21) reports the presence of, and loss of video.

The following feedback commands can be used for possible system automation

via control system.

Reporting Video:

When VGA or HDMI is connected, the DXW will send "~BP1,cr>" or "~BP2".

This data is also sent upon selecting/pressing the input buttons on the wall plate.

Reporting Loss of Video:

Using the "Cable Discconnect Timer String" command, you can program a meesage to be sent

from the DXW via either/both com ports, after loss of both VGA and HDMI signals.

Example Configuration:

Send message via Com1 (HDBT) "No Video" after 5 seconds. Format command like this:

!20CS1,5,No Video%0d

Originally published 6/25/2104