Frequently Asked Question

There are several options for powering the system.

1) AC Adapter / Wall-wart:

Connect power supply to one unit, TX2 or RX2.

Connect units using CAT-5/6/7 vis HDBT Ports on both side.

Both units should now be powered.

2) Use PRO Adapter or POE switch:

Connect POE to LAN1 on either side.

Connect units using CAT-5/6/7 via HDBT ports on both sides.

Both units should now be powered up.

If POE has ethernet, then ethernet is now available on the other 3 LAN ports.

Originally published 12/22/2015