Frequently Asked Question

How to recover RXC controller that was loaded with wrong version of firmware?

Last Updated 3 years ago

In this example, and RXC-4 was loaded with RXC-1 firmware.

To recover unit, follow these steps:

Set your PC/network to access a 192.168.1.X/24 address.
Boot the device in secondary firmware. (Boot to secondary image by device powered ON with MENU button pressed)
Wait for some time and try to ping the device with IP 192.168.1.100
After successful ping, load the url http://192.168.1.100:8080/
Update the device with rxc4-image-RXC4_x.x.x.swu image.